银河集团www.198.net|中國·BinG百科 NO.1

Shenzhen Whandar Optical Technology Co., Ltd.

Product

1000Base-T Copper SFP

SFP-T-10-100-1000BASE AUTO Copper SFP Transceiver

Support hotline:

0755-86654236 /

DownloadProduct Details

Product Description

PRODUCT FEATURES

◆  Up to 1.25 Gb/s bi-directional data links

◆  Hot-pluggable SFP footprint

◆  Low power dissipation(1.05W typical)

◆  Fully metal enclosure, for lower EMI

◆  RoHS 6 compliant and lead-free 

◆  Single +3.3V power supply

◆  10/100/1000 BASE-T operation in host systems with SGMII interface

◆  Ambient Operating temperature: 0°C to +70°C 

SFP to Host Connector Pin Out

Pin

Symbol

Name/Description

Ref.

1

VEET

Transmitter Ground  (Common with Receiver Ground)

1

2

TFAULT

Transmitter Fault. Not supported.


3

TDIS

Transmitter Disable. Laser output disabled on high or open.

2

4

MOD_DEF(2)

Module Definition 2. Data line for Serial ID.

3

5

MOD_DEF(1)

Module Definition 1. Clock line for Serial ID.

3

6

MOD_DEF(0)

Module Definition 0. Grounded within the module.

3

7

Rate Select

No connection required


8

LOS

Loss of Signal indication.  Logic 0 indicates normal operation.


9

VEER

Receiver Ground  (Common with Transmitter Ground)

1

10

VEER

Receiver Ground  (Common with Transmitter Ground)

1

11

VEER

Receiver Ground  (Common with Transmitter Ground)

1

12

RD-

Receiver Inverted DATA out.  AC Coupled


13

RD+

Receiver Non-inverted DATA out.  AC Coupled


14

VEER

Receiver Ground  (Common with Transmitter Ground)

1

15

VCCR

Receiver Power Supply


16

VCCT

Transmitter Power Supply


17

VEET

Transmitter Ground  (Common with Receiver Ground)

1

18

TD+

Transmitter Non-Inverted DATA in. AC Coupled.


19

TD-

Transmitter Inverted DATA in.  AC Coupled.


20

VEET

Transmitter Ground  (Common with Receiver Ground)

1

Notes:

1. Circuit ground is connected to chassis ground

2. PHY disabled on TDIS  > 2.0V or open, enabled on TDIS < 0.8V

3. Should be pulled up with 4.7k - 10k Ohms on host board to a voltage between 2.0 V and 3.6 V. MOD_DEF(0) pulls line low to indicate module is plugged in.  

 

image.png 

 

Figure 1. Diagram of host board connector block pin numbers and names

 

General Specifications

General

Parameter

Symbol

Min

Typ

Max

unit

Notes/Conditions

Data Rate

BR

10


1000

Mb/sec

IEEE 802.3 compatible.

See Notes 2 through 4 below

Cable Length

L



100

m

Category 5 UTP.  BER

Notes:

1. Clock tolerance is +/- 50 ppm

2. By default, the SFP-T-AUTO is a full duplex device in preferred master mode

3. Automatic crossover detection is enabled.  External crossover cable is not required

 

Ordering information

Part Number

Product Description

HD-GLC-TSD

SFP-T-10-100-1000BASE AUTO Copper SFP , SerDes

 

HD-GLC-TSG

SFP-T-10-100-1000BASE AUTO Copper SFP , SGMII

 




MenuProduct center